Marketing Funnel Analyzer
Enter the volume at each funnel stage to see step conversion rates, find the biggest drop-off and simulate improving one stage. Your data stays in your browser.
1. Funnel data
Name and fill 2–5 stages from top to bottom. Leave the last stages empty if unused.
2. Improvement simulation
Assume a higher conversion rate for one step while the other steps stay the same.
3. Funnel and conversion rates
| Stage | Volume | % of first stage | Conversion from previous | Drop-off |
|---|
How to use
Enter real volumes for one period (for example one month) for each stage, top to bottom. The table and chart update instantly. Pick a step and an increase to see how the bottom-of-funnel volume changes.
Method
Step conversion = next stage volume ÷ previous stage volume
Overall conversion = last stage ÷ first stage
The biggest drop-off is the step with the lowest conversion rate; the table also shows the absolute drop-off. The simulation multiplies the chosen step rate by (1 + increase), capped at 100%, then chains the step rates from the first stage.
Limits
This is arithmetic on the numbers you enter, not a forecast. It assumes improving one step does not affect the others, which is rarely fully true. Time lag between stages is not modeled. Data is not saved.
Short FAQ
Is my data sent anywhere? No. All calculations run in your browser.
Is the biggest drop-off where I should invest first? Not necessarily. It is only where the rate is lowest; also weigh cost and how realistic an improvement is.